Unimig Inverter 500 SWF Mig Welder inc Trolley 415V (No Primary Plug Fitted)

The RAZOR™ 500 SWF is a powerful workshop machine with MIG, TIG and STICK welding functions. This machine features the added flexibility of a Separate Wire Feeder unit, allowing up to 10m of extra manoeuvrability in the workshop. Built with solid construction, this machine is designed to withstand the toughest conditions. The RAZOR™ 500 SWF is also Spool Gun and Push-Pull Gun ready, providing MIG welding capabilities across every spool size.

The RAZOR™ SWF series is designed for superior performance and manoeuvrability, offering the highest quality of welds from UNIMIG’s range.

INCLUDES:
- RAZOR™ 500 SWF MIG/TIG/STICK Welder (KUMJRRW500SWF).
- Separate Wire Feeder Unit.
- 10m Interconnecting Cables.
- 4m SB36 MIG Torch.
- 10m Twist Lock Electrode Holder.
- 500 Amp Earth Clamp & Lead.
- Twin Gauge Argon Regulator.
- 2m Gas Hose Complete with fittings.
- Operating Manual.

FEATURES:
- Three-Phase - 415VPower.
- Seperate Wire Feeder - This machine includes a Separate Wire Feeder unit with the added benefit of being able to remove the wire feeder from the power source up to a distance of 10m. This is perfect for workshops when moving a complete machine isn’t an option.
- Spool Gun Ready - This machine is Spool Gun ready, so you have the option of attaching a Spool Gun to run softer core wires such as Aluminium MIG wire. The advantage of the Spool Gun is that you do not need to change the setup of your existing torch or drive roller. The spool gun lets you quickly switch over to get the job done with no downtime.
- Four Geared Wire Drive - This machine features a four geared roller drive unit, providing the most consistent and smoothest wire feed. This also assists with using longer MIG Torches.
- Multi Process Welding - This three in one machine, lets you perform MIG, TIG and STICK welding all on one machine. There is also support for both gas shielded MIG and gasless MIG wire. There is no need to swap between machines, saving you time and setup.
- Push-Pull Ready - Push-Pull Guns provide the smoothest wire speed, especially when MIG welding Aluminium. The ‘Pull’ motor in the torch allows the wire to be fed over a much longer distance, giving you more flexibility to move and manoeuvre whilst MIG welding.
- Highest Quality Welds - Offering nothing but the best, this machine has been designed to offer the highest quality welds available from UNIMIG. With superior welding technology, no corners have been cut to make this machine the most powerful in its class.
- 3 year Warranty.

MACHINE SPECIFICATIONS:
- Primary Input Voltage - 415V Three-Phase.
- Supply Plug - No Plug Supplied (32 AMP Recommended).
- Rated Input Power (kVA) - 25.3.
- Ieff (A) - 24.3.
- Rated Output - 50A/17V - 500A/39V.
- No Load Voltage (V) - 85.
- Protection Class - IP23.
- Insulation Class - F.
- Power Factor - 0.93.
- Minimum Generator (kVA) - 26.0.
- Dinse Connector - 35/50.
- Standard - AS/NZ60974-1.
- Suitable Material - Mild Steel, Stainless Steel, Cast Iron, Silicon Bronze, Aluminium, Copper.
- Warranty (Years) - 3.
- Dimensions (mm) - 595x280x440mm.
- Weight (kg) - 43kg.
- SWF Dimensions (mm) - 630x235x420mm.
- SWF Weight (kg) - 14kg.
- SWF Interlocking Cable Length (m) - 10m.
- Wire Drive - Seperate 4 Geared.
- VRD - Yes.
- Spool Gun Connection - Yes.
- Push/Pull Gun Connection - Yes. ;
- Burnback Adjustment - Synergic.
- Wire Inch - Yes.
- Inductance Control - Yes.
- Crater Current Control - Yes.
- Thermal Overload Protection - Over Temperature Warning.
- Air Arc Gouging - Yes.

MIG SPECIFICATIONS:
- Mig Welding Current Range - 50-500A.
- Mig Duty Cycle @ 40°C - 60% @ 500A.
- Mig Wire Size Range - 0.6-1.6mm.
- Mig Wire Spool Size - 5kg / 15kg.
- Mig Welding Thickness Range - 1-30mm.
- Drive Roller Size - 30/10 (x2).

TIG SPECIFICATIONS:
- Tig Function Type - DC Lift Arc.
- Tig Welding Current Range - 20-500A.
- Tig Duty Cycle @ 40°C - 60% @ 500A.
- Tig Welding Thickness Range - 2-10mm.

STICK SPECIFICATIONS:
- Stick Welding Current Range - 20-500A.
- Stick Duty Cycle @ 40°C - 60% @ 500A.
- Stick Electrode Range - 2.5-6.0mm.
- Stick Welding Thickness Range - 2-20mm.