Lathe Tooling

Jeton 1/4” PT Male to 1/4” Ball Connector (Pack of 4)

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Jeton 1/4” Nozzle (Pack of 4)

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Jeton 1/4” Coolant Hose - 1 Metre

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Vertex Carbide Tipped Dead Centre MT6

FEATURES:- Carbide tipped-HRC 70-Hardened & precision ground-Concentricity within .0002" (0.05 mm)SPECIFICATIONS:- Morse Taper: MT6-Point angle: 60°-Carbide insert length: 30 mm

Jeton 3/8” Coolant Hose 1mtr

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Geiger Lathe Tool Set (9pc.)

FEATURES:- Tools for parting, chamfering, turning, boring and threading-Entry level setSPECIFICATIONS:- 9 Piece Tool Holder Set-12 mm Centre Height-Comes with replaceable tips and Case.

Vertex 45° End Mill Chamfer 3-25mm

FEATURES:- Takes TCMT16T3 insertSPECIFICATIONS:- Shank diameter: 12 mm-Length: 110 mm-Cutter diameter: 25 mm-Capacity: 8-25 mm

Vertex ER16 Spanner - Mini

FEATURES:- Cast Steel, painted black finishSPECIFICATIONS:- Spanner type: Cassillated (M)-Collet: ER16

Vertex Boring Head 100mm

FEATURES:- Ground and balanced for higher speed machiningSPECIFICATIONS:- Boring Head diameter: 100 mm-Boring Bar hole size: 25 mm-Maximum offset: 32 mm-Dial Graduation: 0.01 mm (for 0.02 mm on diameter)-Mount: 1 1/2"x18

Jeton 1/2” Assorted Nozzle Kit with PT Connectors

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Vertex Touch Point Sensor - Edge Finder

FEATURES:- Mechanical touch point centre-For the accurate alignment of the tool spindle and work pieceSPECIFICATIONS:- Drive shaft diameter: 10 mm-Touch point diameter: 6 mm-Accuracy: ±0.005 mm-Speed: 450-600 RPM-Hardness: HRC 56°

Vertex 18pc Ground Parallel Set 8.5mm Blocks

FEATURES:- Hardness: HRC 48° ~ 53°-Process: Four-side ground-Made of high grade alloy steel-Hardened and ground-Set of 9 pairs of parallel blocksSPECIFICATIONS:- Precision Parallels 18pce-Accuracy: 0.01 mm-Width: 8.5 mm-Length: 150 mm-Height:...

Vertex High Load High Speed Live Centre MT5

FEATURES:- Vacuum heat treated shaft HRC60°±2°-The front end is constructed using angular contact ball bearings and a thrust ball bearings-The middle and rear bearings are needle roller-Suited to high speed heavy loan CNC machining-Extra heavy...

Vertex Live Centre High Speed 40mm MT5 2500rpm

FEATURES:- Heavy duty, high speed, waterproof design-Dual ball bearing, thrust and needle roller bearing assembly-Central shaft is vacuum heat treated to HRC60°-WaterproofSPECIFICATIONS:- Taper: MT5-Point angle: 60°-Point width: 40 mm- Accuracy: 0.005...

Vertex Live Centre Heavy Duty 52mm MT5 2000rpm

FEATURES:- Heavy duty high speed centre-Constructed using thrust ball bearings and needle roller bearings-Centre shaft and main body are heat treated-HRC60°±2°SPECIFICATIONS:- Taper: MT5-Point angle: 60°-Point width: 52 mm- Accuracy: 0.005 mm-Max RPM:...

Vertex Parting Inserts 2mm Gtn2 Style Tip

SPECIFICATIONS:- Tip: GTN2 style-(New Part No GTN-2)

Geiger Parting Blade 32mm 2mm Tip Width Gtn2 Style

SPECIFICATIONS:- Parting Blade height: 32mm-Tip width: 2mm-Tip style: GTN2

Jeton Magnetic Base Kit with 1” Flare Nozzle

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Jeton 1/4” Assorted Nozzle Kit with PT Connectors

FEATURES:- Made from petroleum resistant POM plastic which is ideal for use with:-alcohols, ethyl, acetone, commercial detergents, gasoline, greases, lacquer solvents, oils, sodium hydroxide, insecticides & brake fluids.-Is not electricity conductive and...

Vertex Carbide Tipped Dead Centre MT2

FEATURES:- Carbide tipped-HRC 70-Hardened & precision ground-Concentricity within .0002" (0.05 mm)SPECIFICATIONS:- Morse Taper: MT2-Point angle: 60°-Carbide insert length: 8 mm

Bordo 10 x 100mm HSS Cobalt Square Toolbit

FEATURES:- 10 x 100mm HSS Cobalt Square Toolbit- M42 (10% Cobalt) allows shorter cycle times in production environments- M42 is also less prone to chipping when used for interrupted cuts.- Ideal for heavy duty machining of alloy steels and tough...

Bordo Metric Short Flatted Slot Drill Set 6pc

FEATURES:- 6 Piece Metric Short Flatted Slot Drill Set- HSS-Co8 (Cobalt) centre cutting, short flatted, square end- Sometimes referred to as two flute end mills- For general milling operations - creating slots and cavities- Commonly used when milling...

Bordo Tool Steel 12x100mm HSS Cobalt Round

FEATURES:- 12 x 100mm HSS Cobalt Round Toolbit- M42 (10% Cobalt) allows shorter cycle times in production environments.- M42 is also less prone to chipping when used for interrupted cuts.- Ideal for heavy duty machining of alloy steels and tough...

Groz VB/C/4 Cast Iron Vee Block-Matched Pair 100x 40x 65mm 56mm Vee Width

FEATURES:- Made from close grained cast iron, these blocks are precisely ground and machined square and parallel.- The Vee’s are 90° centred in true.- The blocks are manufactured and supplied in numbered pairs and come in handy for holding large jobs...

Vertex OZ25 Collet 25mm

FEATURES:- DIN 6388 Type A- Tool steel hardened and ground- Accuracy: 0.02 mm per 25 mm

Iscar TNMS 160404-12 IC20

FEATURES:- 60° Triangle Shaped Indexable Inserts.- Versatile and dependable, "T" shaped inserts are one of the most popular shapes in the industry.- Negative inserts can provide up to 6 cutting edges.- Available in multiple chipbreakers & grades...

Geiger Magnetic Clean-Up Swarf Wand

FEATURES:- Designed for clearing ferrous swarf- Attracting and release of the swarf is accomplished by a magnet that moves up and down inside the central chamber.SPECIFICATIONS:- Lifting Capacity: 6.30 Kg- Length 400 mm- Weight 0.470 Kg

Vertex MT3 Live Centre Set with Interchangeable Tips

SPECIFICATIONSTaper: MT3Accuracy: 0.008 mmMax RPM: 3000FEATURESComplete set with 7 interchangeable pointsPacked in a wooden caseHigh accuracy and durabilityBody made of SCM-4 special tool steelHardened and groundCan be used for heavy duty work

Jeton 3/8” Coolant Round Nozzle Kit with PT Connector

SPECIFICATIONSEight 3/8" Segments, 3/8" Round Nozzle and 3/8" Male NPT ConnectorFlow Rate: 1500 Ltr/HrMax. Pressure: 100 PSIFEATURESMade from petroleum resistant POM plastic which is ideal for use with:alcohols, ethyl, acetone, commercial detergents,...