Hard Facing

1.2mm Weldclass Platinum SD-980 Hardfacing MigWire 15kg

SD-980 hard-facing MIG welding wire is a versatile and easy-to-use "all-rounder". Being a solid wire, PLATINUM SD-980 is easy to apply and is all-positional. Ideal for applications where abrasion resistance is required, and especially when accompanied by...

1.2mm Weldclass Platinum SD-980 Hardfacing MigWire 4.5kg

SD-980 hard-facing MIG welding wire is a versatile and easy-to-use "all-rounder". Being a solid wire, PLATINUM SD-980 is easy to apply and is all-positional. Ideal for applications where abrasion resistance is required, and especially when accompanied by...

1.2mm Weldclass Platinum CX-1800 Gasless Hardfacing Mig Wire 15kg

Long-Life hardfacing 'MIG' wire for ground-engaging equipment. Very high resistance to abrasion with up to 3-4 times better wear life vs other common hardfacing wires* thanks to high Cr content (~26%) and special additives.Recommended for metal-to-earth...

1.2mm Weldclass Platinum CX-1800 Gasless Hardfacing Mig Wire 4.5kg

Long-Life hardfacing 'MIG' wire for ground-engaging equipment. Very high resistance to abrasion with up to 3-4 times better wear life vs other common hardfacing wires* thanks to high Cr content (~26%) and special additives.Recommended for metal-to-earth...

1.6mm Weldclass Platinum CX-2150 Hardfacing Mig Wire 12.5kg

Extreme performance hardfacing 'MIG' wire, providing a unique combination of both extreme abrasion resistance AND high impact resistance. Up to 6-7 times better wear life vs basic hardfacing wires*... thanks to special carbide additives not found in...

1.2mm Stoody 965 AP-G Tubular Hardfacing Mig Wire 15kg

Stoody 965-G is a tubular hard surfacing wire for surfacing components subjected to wet or dry hard particle abrasion and low to moderate impact loading. Include the surfacing of agricultural points, shares and tynes, sand dredge cutter heads, dredge...

2.0mm Lincoln Lincore 60-O Hardfacing Mig Wire 22.68kg

LINCORE® 60-O Flux-Cored Wire typical application on Bucket lips, Crusher hammers, Ore chutes, Dozer blades and Ripper teeth deposits feature higher alloy levels than to resist both abrasion and moderate impact. Can be used at temperatures up to 704°C...

1.2mm Lincore 55 Hardfacing Mig Wire 11.34kg

Lincore® 55-G Produces a deposit which resists metal-to-metal wear and mild abrasion to be used on carbon steel and low alloy steel offers unlimited layers with proper preheat and Interpass temperatures and procedures.FEATURES:- Produces a deposit which...

2.0mm Lincore 33 Hardfacing Mig Wire 22.68kg

LINCORE® 33 Flux-Cored Wire is ideal for rebuilding worn parts to near final dimensions before applying final hardfacing layers which are more wear resistant, Use for build-up of steel mill parts such as rougher couplings and Build-up deposit on carbon...

1.6mm Lincore 33 Hardfacing Mig Wire 11.34kg

LINCORE® 33 Flux-Cored Wire typical applications include Tractor rolls and idlers, Shovel parts, Mine car wheels, Mill, crusher hammers and Dredge pumps. Delivers tough machinable deposits for build-up or final overlay intended for metal-to-metal wear...

Bossweld GLX 600 Gasless Hardfacing Mig Wire

New generation self shielding (gasless) flux cored wire. High carbon austensitic steel deposit. Ideal for surface abrasion and low impact. Very low fume and spatter levels. 0.9mm wire can be used on a single phase 240 volt, 90 – 250 amp MIG welders.Hard...

1.2mm W/A Hardface 850-O Hardfacing Mig Wire 15kg

1.2mm W/A Hardface 850-O Mig Wire 15kg

1.2mm W/A Hardface L-O Hardfacing Mig Wire 15kg

1.2mm W/A Hardface L-O Mig Wire 15kg

1.6mm Stoody 965-G Tubular Hardfacing Mig Wire 15kg

- Gas (-G) and Self Shielded (-O), Tubular Hardfacing Wires- Air Hardening, Crack Free, Martensitic Steel Deposit- Resistant to Hard Particle Abrasion and Moderate Impact Loading- 1.2mm and 1.6mm sizes can be used for vertical surfacing by depositing...

1.2mm Stoody 101 HC-G Hardfacing Mig Wire 15kg

- High Alloy, Tubular Hardfacing Wire- High Chromium – Carbide Iron Deposit- For Ground Engaging Applications- Resistant to Severe Abrasion and Low to Moderate Impact LoadingTypical applications include the hard, surfacing of crusher cones and mantles,...

1.2mm Stoody 965-G Tubular Hardfacing Mig Wire 15kg

- Gas (-G) and Self Shielded (-O), Tubular Hardfacing Wires- Air Hardening, Crack Free, Martensitic Steel Deposit- Resistant to Hard Particle Abrasion and Moderate Impact Loading- 1.2mm and 1.6mm sizes can be used for vertical surfacing by depositing...

1.2mm W/A Robodur K 350-G Hardfacing Mig Wire 15kg

ClassificationEN 14700 T Fe1Description- Seamless copper coated tubular wire for gas shielded metal arc hardfacing- Low alloy martensitic deposit- Excellent weldabilityApplicationsRobodur K 350-G is used for surfacing and rebuilding parts subjected to...

1.2mm Hyundai Supershield CrC Hardfacing Mig Wire 5kg

FEATURES:- Premium quality gasless hardfacing wire for components subject to severe abrasion and low to moderate impact loading- Very high chromium content for exceptional wear life- Proven to outlast standard hardfacing electrodes and wires many times...

1.6mm Hyundai Supershield CrC Hardfacing Mig Wire 15kg

SpecificationsTypical hardness of all-weld metal 54 – 58 HRcTypical composition of all-weld metal C 4.8%  Si 0.4%  Mn 1.6%  Cr 27%Advantages- Premium quality gasless hardfacing wire for components subject to severe abrasion and low to moderate impact...

1.2mm Hyundai Supershield CrC Hardfacing Mig Wire 15kg

FEATURES:- Premium quality gasless hardfacing wire for components subject to severe abrasion and low to moderate impact loading- Very high chromium content for exceptional wear life- Proven to outlast standard hardfacing electrodes and wires many times...