Crack Detection

Magnaflux #1 Gray Colored Non-fluorescent Magnetic Particles 45 lb / 20.4 kg pail

Gray provides strong contrast on most metal surfaces during dry method mag particle testing in visible light. It is ready-to-use for visible light flaw detection of surface and slightly subsurface discontinuities in ferrous metals. It can be used in a...

Dy-Mark Flawchek Step 1 Preclean 350g

Cleaner / remover is used both for precleaning and penetrant removal. Precleaning spray directly on surface. After 30 seconds, wipe cleaner from the surface with clean, dry lint free rag or towel. Allow time for cleaner to evaporate completely from any...

Ardrox 5319 Solvent Cleaner Aerosol 300g

Ardrox 5319 is clear colourless non-chlorinated cleaner which evaporates rapidly leaving no residue. Ardrox 5319 is designed to remove Ardrox 8901W White Background Lacquer, light oils and marker pen ink.

Dy-Mark Flawchek 4 Part Inspection Kit

- Dye penetration visible inspection system that detects cracks and flaws in metals and castings- Fast, efficient and cost effective method- Conforms to AS2062 TYPE 2 METHOD C- 4-step system - Preclean, Penetrant, Remover and Developer

Dy-Mark Flawchek Step 3 Remover 350g

- Dye penetration visible inspection system that detects cracks and flaws in metals and castings- Fast, efficient and cost effective method- Conforms to AS2062 TYPE 2 METHOD C- 4-step system - Preclean, Penetrant, Remover and Developer

Dy-Mark Flawchek Step 2 Penetrant 350g

- Dye penetration visible inspection system that detects cracks and flaws in metals and castings- Fast, efficient and cost effective method- Conforms to AS2062 TYPE 2 METHOD C- 4-step system - Preclean, Penetrant, Remover and Developer

Dy-Mark Flawchek Step 4 Developer 350g

- Dye penetration visible inspection system that detects cracks and flaws in metals and castings- Fast, efficient and cost effective method- Conforms to AS2062 TYPE 2 METHOD C- 4-step system - Preclean, Penetrant, Remover and Developer

Ardrox 9705 Fluorescent Penetrant Aerosol 300g

Water washable Fluorescent Penetrant

Ardrox 8901W White Background Lacquer 5L Drum

Ardrox® 8901W is a suspension of a white pigment in a resin base, which utilises a fast drying, flammable solvent system. The product does not contain any halogenated hydrocarbons. Ardrox® 8901W is used in conjunction with the Ardrox® visible magnetic...

Ardrox 8501 Fluorescent Magnetic Ink Aerosol 300g

High Sensitivity Fluorescent Magnetic InkARDROX® 8501 is the ready-to-use suspension of a fluorescent iron oxide with the finest particle size in a carrier oil with a high flashpoint and low aromatic contents (< 0.03 %).

Ardrox 9PR50C Penetrant Remover Aerosol 300g

DescriptionArdrox 9PR50C is a high purity solvent which is rapid drying and leaves no residue on evaporation. Ardrox 9PR50C does not contain aromatic or chlorinated hydrocarbon solvents and it is of relatively low toxicity. It is low in trace...

Ardrox 907PB Penetrant Aerosol 300g

Ardrox® 907PB is a visible light inspection penetrant as per the AMS 2644 Type 2 and ISO3452 Part 2, Type II, which can be removed by water or solvents. It is used in non-destructivetesting for the detection of defects such as cracks, laps, cold shuts,...

Ardrox 9D1B Developer Aerosol 300g

Ardrox® 9D1B is a suspension of an inert white powder in a quick drying solvent. It has a low sulphur, halogen and alkali metal content. Ardrox® 9D1B can be used with any of the Ardrox® range of visible and fluorescent penetrants.

CT Developer 300g Aerosol

CT-DVP CHEMTIG™ DETECTING DEVELOPERChemtools Developing Detector reveals microscopic cracks and flaws on the surface of metals, plastics and ceramics. Consists of a white powder suspended in solvents. Pulls entrapped penetrant to the surface by capillary...

CT Dye Penetrant 300g Aerosol

CT-DPI CHEMTIG™ RED DYE PENETRANTChemtools Red Dye Penetrant is formulated to seep into any micro cracks present in a weld seam. Locates surface-breaking defects in all non-porous materials including plastics, ceramics and most metals. This product is...

CT Weld Crack Detection Kit

Chemtools weld crack kit and fault finder system is specially formulated for weld seam quality assurance. Detects microscopic cracks and flaws on the surface of metals, plastics and ceramics revealing them as red marks on a white background. A simple 5...

Ardrox 8901W White Background Lacquer Aerosol 300g

Ardrox® 8901W is a suspension of a white pigment in a resin base, which utilises a fast drying, flammable solvent system. The product does not contain any halogenated hydrocarbons. Ardrox® 8901W is used in conjunction with the Ardrox® visible magnetic...

Ardrox 800/3 Black Magnetic Ink Aerosol 300g

Black magnetic ink, pre-mixed, high sensitivity. Magnetic Particle Inspection for the detection of surface and near surface defects in ferro-magnetic materials. Ardrox 800/3 is a ready-to-use high sensitivity black magnetic ink consisting of black iron...