null
Created with Sketch. Created with Sketch.

Comet Type Components

  • Harris 242 Compatible Cutting Torch 480mm

    GCA-H242HC

    Harris 242 Compatible Cutting Torch 480mm

    Harris 242HC Cutting Torch- Works on lower fuel pressure (40kPa) increasing safety- Cuts to 200mm- Triangular stainless steel gas tubes for added strength- Suits Type 41 & 44 cutting tips for either Oxy/Acety or Oxy/LPG- Ease-on built in for better...

    $273.30 ex GST
    Add to Cart
  • Cigweld Oxygen Pressure Gauge 1.600kPa

    GRZ-301660

    Cigweld Oxygen Pressure Gauge 1.600kPa

    - Optimum safety through pre-set first stage pressure reduction- Highly accurate via sensitive adjustment of second stage outlet- Excellent pressure/flow characteristics- Constant outlet pressure regardless of variations of inlet pressure- Regulator is...

    $61.10 ex GST
    Add to Cart
  • Comet 3 Oxy Cutting Attachment

    GCA-304005

    Comet 3 Oxy Cutting Attachment

    The COMET 3 Cutting Attachment is used in conjunction with the COMET 3 Blowpipe and is suitable for hand cutting, sheet metal cutting, rivet cutting, heating and gouging.- Attaches quickly and easily to COMET 3 Blowpipe by hand (no spanner required)-...

    $234.00 ex GST
    Add to Cart
  • Comet 3 Oxy Handle/Blowpipe

    GCA-304001

    Comet 3 Oxy Handle/Blowpipe

    The COMET 3 blowpipe, when used with appropriate attachments, is suitable for fusion welding, braze welding, brazing, soldering, heating, hand cutting, sheet metal cutting, rivet cutting, powder facing and flame cleaning.- Two stage valve gives precise...

    $208.20 ex GST
    Add to Cart
  • Comet 3 Oxy Mixer Heat Lge

    GCA-304003

    Comet 3 Oxy Mixer Heat Lge

    COMET 3 Type 570 mixer is used for heating with all Oxy/Fuel gas type combinations- Hand tightening for easy attachment onto COMET 3 Blowpipe. (‰Û÷0‰’ ring seals ensure a perfect gas-tight connection every time)- Large flutes on mixer give easy positive...

    $51.00 ex GST
    Add to Cart
  • Comet 3 Oxy Mixer Heating Type 574

    GCA-304166

    Comet 3 Oxy Mixer Heating Type 574

    COMET 3 Type 574 mixer is an injector mixer used for heating with Oxy/LPG, Oxy/Natural gas combinations, in heavy duty high flow applications. For use with SHP3 and SHP4 heating tips only.- Hand tightening for easy attachment onto COMET 3 Blowpipe. (O...

    $99.50 ex GST
    Add to Cart
  • Comet 3 Oxy Mixer Weld/Heat

    GCA-304002

    Comet 3 Oxy Mixer Weld/Heat

    COMET 3 Type 550 mixer is used for welding and light heating with all Oxy/Fuel gas type combinations- Hand tightening for easy attachment onto COMET 3 Blowpipe. (‰Û÷0‰’ ring seals ensure a perfect gas-tight connection every time)- Large flutes on mixer...

    $46.60 ex GST
    Add to Cart
  • Comet Multi-Purpose 3 Cutting Torch

    GCA-304143

    Comet Multi-Purpose 3 Cutting Torch

    The COMET Multi-Purpose 3 Cutting Torch can be used in a wide variety of heavy industrial applications that include heavy duty cutting, gouging, steel construction, foundry, demolition and scrap cutting. A universal multi-fuel mixer allows the torch to...

    $1,297.60 ex GST
    Add to Cart
  • Cutskill Oxy Cutting Attachment

    GCA-204005

    Cutskill Oxy Cutting Attachment

    The CutSkill cutting attachment presents a budget priced alternative to the COMET series. Like the entire range of CIGWELD’s gas equipment products, these quality cutting attachments are manufactured to stringent internal engineering standards- Cuts up...

    $80.80 ex GST
    Add to Cart
  • Cutskill Oxy Handle/Blowpipe

    GCA-204001

    Cutskill Oxy Handle/Blowpipe

    The CutSkill blowpipe presents a budget priced alternative to the COMET series. Like the entire range of CIGWELD’s gas equipment products, these quality blowpipes are manufactured to stringent internal engineering standards- Cuts up to 150mm (6)-...

    $78.20 ex GST
    Add to Cart
  • Tesuco Oxy Cutting Attachment 180 Degree

    GCA-GWCA02

    Tesuco Oxy Cutting Attachment 180 Degree

    Available in both a 90° and 180° head design, the Tesuco® cutting torches with multi mixer, is suitable for both Type 41 (oxygen / acetylene) and Type 44 (oxygen / LPG) cutting nozzles. They feature hand tightening for ease of attachment to the blowpipe...

    $111.43 ex GST
    Add to Cart
  • Weldclass Oxy Cutting Attachment

    GCA-CA

    Weldclass Oxy Cutting Attachment

    Torch Cutting Attachment for Oxy/Acetylene & Oxy/LPG cutting. PLATINUM series, no quality short-cuts, designed with attention to detail & manufactured to strict quality-control standards, for performance you can depend on. Designed and...

    $95.50 ex GST
    Add to Cart
  • Weldclass Oxy Handle/Blowpipe

    GCA-BP

    Weldclass Oxy Handle/Blowpipe

    Blowpipe torch Handles for Oxy/Acetylene & Oxy/LPG cutting, heating & brazing. PLATINUM series, no quality short-cuts, designed with attention to detail & manufactured to strict quality-control standards, for performance you can depend on...

    $82.50 ex GST
    Add to Cart