FEATURES:
- Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
- Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
- Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
- Guide stop for a uniform finish and high quality surface finish when processing straight edges
- Bail handle adjusts without tools for secure, even guiding
- Metabo Marathon-motor with patented dust protection for long service life
- Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almostconstant under load
- Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
- Electronic overload protection, soft start and restart protection
- Slim design for ideal handling
SPECIFICATIONS:
Characteristics:
- No-load speed: 4500 - 11500 rpm
- Rated input power: 900 W
- Output power: 470 W
- Type of edges: Chamfer and radius
- Max. chamfer width 45°: 6 mm / 1/4 "
- Max. chamfer height at 45°: 4 mm / 5/32 "
- Possible radii: R2 / R3
- Grading of cutting depth setting: 0.1 mm / 0.00394 "
- Curves smallest internal Ø: 13 mm
- Weight (without power cable): 2.5 kg / 5.5 lbs
- Cable length: 4 m / 13 ft
Noise emission:
- Sound pressure level: 87 dB(A)
- Sound power level (LwA): 98 dB(A)
- Uncertainty of measurement K: 3 dB(A)
SCOPE OF DELIVERY:
- 2 carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- Guide Stop
- Screwdriver for Torx screws 15
- Bow-type handle
- MetaLoc case
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
- Compact metal bevelling tool for 45° chamfers and radii of 2 to 3 mm at visible edges
- Surfaces free from oxide and burrs as ideal preparation for the application of powder or paint coatings for maximum protection from corrosion
- One-touch controller: Patented, tool-free setting of the cutting depth in 0.1 steps; stop points for short setting times, and protection against unintentional adjustment of the cutting depth when working
- Slim cutter head with standard carbide indexable inserts and ball-bearing stationary seal ring for working in tubes and in curves
- Guide stop for a uniform finish and high quality surface finish when processing straight edges
- Bail handle adjusts without tools for secure, even guiding
- Metabo Marathon-motor with patented dust protection for long service life
- Thumbwheel controlled Vario-Constamatic (VC)-Full wave electronics ideal for working on materials requiring customised speeds, and at speeds which remain almostconstant under load
- Electronic safety shutdown of the motor for safe working in case the tool stops unexpectedly
- Electronic overload protection, soft start and restart protection
- Slim design for ideal handling
SPECIFICATIONS:
Characteristics:
- No-load speed: 4500 - 11500 rpm
- Rated input power: 900 W
- Output power: 470 W
- Type of edges: Chamfer and radius
- Max. chamfer width 45°: 6 mm / 1/4 "
- Max. chamfer height at 45°: 4 mm / 5/32 "
- Possible radii: R2 / R3
- Grading of cutting depth setting: 0.1 mm / 0.00394 "
- Curves smallest internal Ø: 13 mm
- Weight (without power cable): 2.5 kg / 5.5 lbs
- Cable length: 4 m / 13 ft
Noise emission:
- Sound pressure level: 87 dB(A)
- Sound power level (LwA): 98 dB(A)
- Uncertainty of measurement K: 3 dB(A)
SCOPE OF DELIVERY:
- 2 carbide indexable inserts 45° chamfer (ISO: DCMT 11 T 304)
- 2 Carbide indexable inserts radius R2
- 2 Carbide indexable inserts radius R3
- Guide Stop
- Screwdriver for Torx screws 15
- Bow-type handle
- MetaLoc case
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
| Minimum Sale Qty: | 1 |
Custom Field
Inner Qty 1
Cross Reference KFM 9-3 RF
Sales Unit EA
Wire Item false
Brand Metabo
On Sale Item false
Price Always false
ns_id 57816
item_type _inventoryItem
Shipping Class NON DG
Estimated Lead Time 2-3 weeks
Minimum Sale Qty 1
