Thermic Lance Handle
A Thermic Lance Handle is necessary for the safe operation of a Thermic Lance. This Handle can be adapted to suit 12mm, 16mm & 19mm Thermic Lances. It has a built-in Flash/Slag Arrestor, which does not restrict the volume of Oxygen that is required to operate the Thermic Lance. The new design Handle now has a heavier Locking Nut to allow extra Hand-Tighten pressure on securing & sealing the Lance into position. Also, spanner grooves has been machined in, if the operator is fatigued and does not have to rely on Hand-Tightening alone.
- This Handle should only be used with minimum 10mm I.D. Oxygen Hose with standard 5/8" UNF Fittings
- Recommended Operating Pressure: 420kpa (60psi) Do Not Exceed 600kpa (85psi)
- If extra Oxygen Flash-Back Arrestors are used, please ensure they are High-Volume Arrestors, as the Thermic Lance requires sufficient volume to operate efficiently.
A Thermic Lance Handle is necessary for the safe operation of a Thermic Lance. This Handle can be adapted to suit 12mm, 16mm & 19mm Thermic Lances. It has a built-in Flash/Slag Arrestor, which does not restrict the volume of Oxygen that is required to operate the Thermic Lance. The new design Handle now has a heavier Locking Nut to allow extra Hand-Tighten pressure on securing & sealing the Lance into position. Also, spanner grooves has been machined in, if the operator is fatigued and does not have to rely on Hand-Tightening alone.
- This Handle should only be used with minimum 10mm I.D. Oxygen Hose with standard 5/8" UNF Fittings
- Recommended Operating Pressure: 420kpa (60psi) Do Not Exceed 600kpa (85psi)
- If extra Oxygen Flash-Back Arrestors are used, please ensure they are High-Volume Arrestors, as the Thermic Lance requires sufficient volume to operate efficiently.
Custom Field
Inner Qty 1
Cross Reference HANDLE16
Sales Unit EA
Wire Item false
Estimated Lead Time 3-5 days
Brand ATLC
On Sale Item false
Price Always false
ns_id 1489
item_type _inventoryItem
Shipping Class NON DG
Minimum Sale Qty 1
UNSPSC Code 23271700
