Vertex

Vertex Drill Chuck Arbor MT2 x B16

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT2-Chuck taper: B16

Vertex MT4 Male to MT5 Female Extension Socket

FEATURES:- All internal and external surfaces are hardened and groundSPECIFICATIONS:- Master Taper: MT4-Extension Taper: MT5

Vertex MT3 Male to MT3 Female Extension Socket

FEATURES:- All internal and external surfaces are hardened and groundSPECIFICATIONS:- Master Taper: MT3-Extension Taper: MT3

Vertex Carbide Tipped Dead Centre MT6

FEATURES:- Carbide tipped-HRC 70-Hardened & precision ground-Concentricity within .0002" (0.05 mm)SPECIFICATIONS:- Morse Taper: MT6-Point angle: 60°-Carbide insert length: 30 mm

Vertex Drill Chuck Arbor MT3 x B16

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT3-Chuck taper: B16

Vertex Drill Chuck Arbor MT2 x JT3

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT2-Chuck taper: JT3

Vertex 45° End Mill Chamfer 3-25mm

FEATURES:- Takes TCMT16T3 insertSPECIFICATIONS:- Shank diameter: 12 mm-Length: 110 mm-Cutter diameter: 25 mm-Capacity: 8-25 mm

Vertex Drill Chuck Arbor Thread Mount

FEATURES:- Morse taper arbor with taper and threaded mounts. Precision ground, hardened and tempered.SPECIFICATIONS:- Arbor: MT2 Morse Taper-Thread: 3/8" x 24 tpi-Thread Length: 14.3 mm-Overall...

Vertex ER16 Spanner - Mini

FEATURES:- Cast Steel, painted black finishSPECIFICATIONS:- Spanner type: Cassillated (M)-Collet: ER16

Vertex Boring Head 100mm

FEATURES:- Ground and balanced for higher speed machiningSPECIFICATIONS:- Boring Head diameter: 100 mm-Boring Bar hole size: 25 mm-Maximum offset: 32 mm-Dial Graduation: 0.01 mm (for 0.02 mm on...

Vertex Flange Nut M16 (4515)

FEATURES:- Heat Treated Steel-Black Oxide Finish-HRC 34°SPECIFICATIONS:- Flange diameter: 35 mm-Height: 17 mm-Hex diameter:26 mm-Thread: M16

Vertex Flange Nut M12 (4514)

FEATURES:- Heat Treated Steel-Black Oxide Finish-HRC 34°SPECIFICATIONS:- Flange diameter: 28 mm-Height: 16 mm-Hex diameter: 21 mm-Thread: M12

Vertex Stud and Nut Kit 38pce M12 x 1.75 Stud 16mm Slot

FEATURES:- Heat treated steel black oxide finish-100/125/150/175/200 mm stud lengths-All parts can be purchased individually-25mm varnished MDF StandSPECIFICATIONS:- Stud Size: M12x1.75-Table Slot:...

Vertex Drill Chuck Arbor MT3 x JT3

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT3-Chuck taper: JT3

Vertex Clamp Kit M12 x 1.75 Stud 14mm Slot

FEATURES:- Heat treated steel black oxide finish-75/100/125/150/175/200 mm stud lengths-All parts can be purchased individually-Block size 1" (25mm)SPECIFICATIONS:- Stud Size: M12x1.75-Table Slot: 14...

Vertex Touch Point Sensor - Edge Finder

FEATURES:- Mechanical touch point centre-For the accurate alignment of the tool spindle and work pieceSPECIFICATIONS:- Drive shaft diameter: 10 mm-Touch point diameter: 6 mm-Accuracy: ±0.005 ...

Vertex 18pc Ground Parallel Set 8.5mm Blocks

FEATURES:- Hardness: HRC 48° ~ 53°-Process: Four-side ground-Made of high grade alloy steel-Hardened and ground-Set of 9 pairs of parallel blocksSPECIFICATIONS:- Precision Parallels 18pce-Accuracy: 0...

Vertex Drill Chuck Arbor MT5 x JT6

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT5-Chuck taper: JT6

Vertex 151mm Hydraulic Milling Vice

FEATURES:- High Accuracy, flame hardened and ground beds-Concealed spindle for extra swarf protection-Quick clamp 3 position moving jaw location-Accurate to within 0.02 mm-Heavy duty milling...

Vertex High Load High Speed Live Centre MT5

FEATURES:- Vacuum heat treated shaft HRC60°±2°-The front end is constructed using angular contact ball bearings and a thrust ball bearings-The middle and rear bearings are needle roller-Suited to...

Vertex Live Centre High Speed 40mm MT5 2500rpm

FEATURES:- Heavy duty, high speed, waterproof design-Dual ball bearing, thrust and needle roller bearing assembly-Central shaft is vacuum heat treated to HRC60°-WaterproofSPECIFICATIONS:- Taper:...

Vertex Live Centre Heavy Duty 52mm MT5 2000rpm

FEATURES:- Heavy duty high speed centre-Constructed using thrust ball bearings and needle roller bearings-Centre shaft and main body are heat treated-HRC60°±2°SPECIFICATIONS:- Taper: MT5-Point angle:...

Vertex Parting Inserts 2mm Gtn2 Style Tip

SPECIFICATIONS:- Tip: GTN2 style-(New Part No GTN-2)

Vertex 1-16mm Keyed Drill Chuck JT3 Mount

FEATURES:- Suitable for milling machines, lathes, drilling machines and woodworking machines-Comes complete with keySPECIFICATIONS:- Capacity: 1-16 mm-Mount: JT3-Outer diameter: 56 mm-Length open: 78...

Vertex 1-13mm Keyed Drill Chuck JT6 Mount

FEATURES:- Suitable for milling machines, lathes, drilling machines and woodworking machines-Comes complete with keySPECIFICATIONS:- Capacity: 1-13 mm-Mount: JT6-Outer diameter: 47 mm-Length open: 65...

Vertex Drill Chuck Arbor MT1 x JT6

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT1-Chuck taper: JT6

Vertex Carbide Tipped Dead Centre MT2

FEATURES:- Carbide tipped-HRC 70-Hardened & precision ground-Concentricity within .0002" (0.05 mm)SPECIFICATIONS:- Morse Taper: MT2-Point angle: 60°-Carbide insert length: 8 mm

Vertex Drill Chuck Arbor MT3 x JT6

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT3-Chuck taper: JT6

Drill Chuck Arbor MT2 x JT6

FEATURES:- Surface hardened and groundSPECIFICATIONS:- Drill Taper: MT2-Chuck taper: JT6

Vertex OZ25 Collet 25mm

FEATURES:- DIN 6388 Type A- Tool steel hardened and ground- Accuracy: 0.02 mm per 25 mm

Vertex MT3 Live Centre Set with Interchangeable Tips

SPECIFICATIONSTaper: MT3Accuracy: 0.008 mmMax RPM: 3000FEATURESComplete set with 7 interchangeable pointsPacked in a wooden caseHigh accuracy and durabilityBody made of SCM-4 special tool...