Workshop Equipment

SP Tools Gear Puller & Bearing Splitter Set 14pce

- Aids in the removal of pulleys, gears and steering wheels- Separates ball bearings- Drop forged, heat treated steel attachments- Hardened and tempered, precision machined steel bolts- Chrome plated...

SP Tools 200mm 3 Jaw Reversible Gear Puller

- Available in 4 sizes: 75mm, 100mm, 150mm & 200mm- Applies even pressure to easily remove gears, pulleys, bearings and flywheels from shaft without damage- Inside & outside reversible hooked jaws...

SP Tools Heavy Duty Workshop Seat

- Heavy duty chrome polished frame- Ball bearing oversized swivel castors- Easy access storage tray- High density foam seat

SP Tools Harmonic Balancer Puller

- Removes balancers, steering wheels, pulleys and/or gears with tapped holes- Floating swivel helps prevent damage to shaft end- 4 slots in yoke: use for 2, 3 or 4 hole applications- Puller applies...

SP Tools Mechanics Creeper

- 6 heavy duty wheels- 1030mm x 440mm

SP Tools Magnetic Mudguard/Fender Protector

- Vinyl with soft inner to protect car paintwork- Contains hidden sleeved magnets to hold cover firmly in position- Resistant to oil, grease & water- 810mm (w) x 645mm (H)

SP Tools Sumo Mechanics Workshop Creeper

- 20% wider - Ideal for bigger built/taller lads- Heavy duty steel frame- 6 heavy duty castors- Wide padded body & head rest- Capacity: 150kg- 1015mm x 540mm

SP Tools 75-105mm Bearing Separators

- Available in 4 sizes: 10-30mm, 30-50mm, 50-75mm & 75-105mm- Designed to remove bearings & gears where access is available behind the item- Can be used in conjunction with hydraulic pullers, twin...

SP Tools Mechanics Creeper with Adjustable Headrest

- Heavy duty castors- Adjustable head rest

SP Tools 100mm 2 Jaw Reversible Gear Puller

- Available in 4 sizes: 75mm, 100mm, 150mm & 200mm- Easily remove gears, pulleys, bearings, sprockets and flywheels from shaft without damage- Inside & outside reversible hooked jaws for external or...

SP Tools 150mm 3 Jaw Reversible Gear Puller

- Available in 4 sizes: 75mm, 100mm, 150mm & 200mm- Applies even pressure to easily remove gears, pulleys, bearings and flywheels from shaft without damage- Inside & outside reversible hooked jaws...

SP Tools Heavy Duty Steering Wheel Puller

- Heavy duty design- 2 Hole yoke suits most steering wheels- Includes 1/4”, 5/16” & 3/8” M8 bolts

Mako 10 Ton Hydraulic Puller Kit

Contents: 4” x 2 Jaw gear puller 6” x 2 Jaw gear puller 8” x 2 Jaw gear puller 4” x 3 Jaw gear puller 6” x 3 Jaw gear puller 8” x 3 Jaw gear puller Separator 75mm-105mm 2 x 200mm Main rods 2 x 200mm...

Mako 100mm (4”) Fabricated All Steel Offset Vice

4”(100mm)

Mako 35mm-80mm Armature Bearing Puller

35mm-80mm

Mako 200mm (8”) 2 Jaw Reversible Gear Puller

Size: 8? Max Reach (mm):200 Max Spread (mm):175 Bolt Diameter(mm):23

Mako 19mm-35mm Armature Bearing Puller

19mm-35mm

SP Tools Mechanics Protective Seat Cover

- Heavy duty nylon- Easy slip-on design- Protects seats against oil, grease and water

Mako 150mm (6”) 2 Jaw Reversible Gear Puller

Size: 6? Max Reach (mm):150 Max Spread (mm):225 Bolt Diameter(mm):19

Mako Harmonic Balance Puller

Bolts included: 3 5/16”- 24 x 2” 2 3/8”- 8 x 3-1/8” 3 M8 x 50mm 2 M10-1.5 x 100mm For use with harmonic balance,steering wheels, flywheels, gears and pulleys with tapped holes.

Mako 100mm (4”) 2 Jaw Reversible Gear Puller

Size: 4? Max Reach (mm):100 Max Spread (mm):150 Bolt Diameter(mm):17

ITM Cast Iron Chain Pipe Vice 40-230mm Capacity

Superb chain pipe vice with hardened steel jaws & close grained cast iron body.Minimum pipe diameter: 40mmMaximum pipe diameter: 230mmChain length: 850mmSpindle thread: M16x2Vice Dimensions: 292 x...

Mako 150mm Swivel Base Steel Vice with Anvil

TOV-060T – Fabricated All Steel Swivel Base ViceFabricated All Steel Swivel Base Vice

Trademaster Fabricated Steel Bench Vice Offset Jaw 200mm

These extra heavy-duty fabricated bench vised are manufactured from heavy steel plate and designed for use in industrial workshops. The sliding jaw and large diameter screw allows for precise and...

Mako 150mm Fabricated All Steel Offset Vice

Designed for heavy duty industrial use, this range of vices are the perfect addition to any workshop.The steel fabricated vice range include both Straight and Offset designs, available in 100mm (4"),...