Striking Tools

Groz NP/5 5mm Number Punch Set

FEATURES:- Manufactured from quality carbon steel. - Punches are induction hardened, which gives durability and extended life for repeated use. - The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This...

Groz NP/4 4mm Number Punch Set

FEATURES:- Manufactured from quality carbon steel. - Punches are induction hardened, which gives durability and extended life for repeated use. - The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This...

Groz NP/3 3mm Number Punch Set

FEATURES:- Manufactured from quality carbon steel. - Punches are induction hardened, which gives durability and extended life for repeated use. - The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This...

Groz PP/HD/5L/ST 200mm Pin Punch Set Hex Shank 5pce

Pin Punches are manufactured from high quality carbon steel, accurately hardened and tempered so that the pin will withstand continuous use and the striking end will not splinter. These are induction hardened to ensure consistent hardness and a special...

Groz DDP/8/ST 200mm Pin Punch Set 8pce

These round shank pin punches have clean and well cut knurling which provides positive, non slip grip. This range of punches has rust inhibiting black oxide finish. Two piece construction with a 90mm (3-3/4”) long pin. The two piece construction allows...

Groz CP/HD/5/ST Centre Punch Set 5pce

Manufactured from hardened and tempered carbon steel, designed for demanding industrial use. These Centre Punches are ideal for clearly marking metal in work layout & making indentations in a work piece before drilling to ensure correct location of drill...

Groz FLR/CHS/9/2-1-2 225mm Floor Chisel 63mm Wide Blade

With a much thinner blade construction than a Brick Bolster, Electricians Floorboard Bolsters are used for cutting tongued joints & lifting floorboards.SPECIFICATIONS:- Code: FLR/CHS/9/2-1-2- Blade Width: 63mm- Overall Length: 225mm

Groz LP/3 3mm Letter Punch Set

FEATURES:- Manufactured from quality carbon steel. - Punches are induction hardened, which gives durability and extended life for repeated use. - The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This...

Groz ACP/1B Automatic Centre Punch

FEATURES:- Automatic single hand operated spring loaded punch. - The built in mechanism delivers a punch just with the pressing of the head. - The depth of the impression is variable and can be adjusted from light marking to heavy blows by turning the...

Groz LP/10 10mm Letter Punch Set

FEATURES:- Manufactured from quality carbon steel. - Punches are induction hardened, which gives durability and extended life for repeated use. - The hardness at the stamping end is maintained at 58-62 HRC, the striking end is tempered to 38-43 HRC. This...

SP Tools 45oz 2.8bls Club Hammer Fibreglass Handle

- Available in 3 sizes: 45oz, 53oz & 70oz- Multi-purpose & heavy duty- Dual striking faces- Hardened high quality steel head- Superior performance and comfort- Durable fibreglass handle for strength and shock reduction- Non-slip rubber grip for ultimate...

SP Tools 12mm-16mm Nut Splitter

- Available in 4 individual sizes: 9-12mm, 12-16mm, 16-22mm & 22-27mm- Splitting of seized bolts and/or over tightened bolts without damaging the thread- Chrome molybdenum steel blades with forged high carbon steel grips- Hardened, tempered & chrome...

SP Tools 16mm-22mm Nut Splitter

- Available in 4 individual sizes: 9-12mm, 12-16mm, 16-22mm & 22-27mm- Splitting of seized bolts and/or over tightened bolts without damaging the thread- Chrome molybdenum steel blades with forged high carbon steel grips- Hardened, tempered & chrome...

SP Tools Rolling Head Pry Bar Set 3pce

- Set Includes: 150mm (6”), 300mm (12”) & 460mm (18”)- Heavy duty chrome vanadium steel construction

SP Tools Extendable Long Pry Bar

- Long pry bar with extendable handle- 570 - 840mm length- 16mm shank- Jimmy end

SP Tools Pry Bar Set 4pce

- Set Includes: 6x200mm(1/4”x8”), 9x300mm (3/8”x12”), 11x460mm (7/16”x18”) & 11x610mm (7/16”x24”)- High quality heat treated Chrome Molybdenum steel blades- Square shanked with angled heads- Go-Thru blade with striking cap allows hitting the bar with a...

SP Tools 5x12x150mm Centre Punch

- Available in 4 individual sizes: 3, 4, 5 & 6mm- Designed to make an indentation in metal, plastic or wood prior to drilling to prevent the bit skating off target- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability- Single piece...

SP Tools Centre Punch Set 4pce

- Set Includes: 3, 4, 5 & 6mm- Designed to make an indentation in metal, plastic or wood prior to drilling to prevent the bit skating off target- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability- Single piece construction- Hexagonal shank...

SP Tools 35mm Dual Soft Head Hammer

- Available in 3 sizes: 35mm, 40mm & 50mm- Soft face heads deliver a solid strike without damaging surfaces and sensitive finishes- Offers safe blows of maximum weight and impact- Faces are designed to wear and can be replaced- Durable fibreglass handle-...

SP Tools 40mm Dual Soft Head Hammer

- Available in 3 sizes: 35mm, 40mm & 50mm- Soft face heads deliver a solid strike without damaging surfaces and sensitive finishes- Offers safe blows of maximum weight and impact- Faces are designed to wear and can be replaced- Durable fibreglass handle-...

SP Tools 32oz Dead Blow Hammer

- Available in 4 sizes: 16oz, 32oz, 44oz & 48oz- Rebound dampening shot filled head - No recoil- Controls striking force with minimal rebound from the striking surface- Minimises damage to the struck surface- Non sparking and non marring- Ideal for...

SP Tools 2x115mm Pin Punch

- Available in 7 individual sizes: 2, 3, 4, 5, 6, 8 & 10mm- Designed to drive out pins and rivets- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability- Single piece construction- Hexagonal shank for additional durability- Heat tempered to...

SP Tools 160oz Club Hammer Fibreglass Handle

- Available in 3 sizes: 128oz, 160oz & 192oz- Multi-purpose & heavy duty- Heat treated head with overstrike protector- Durable fibreglass handle for unrivalled strength and shock reduction- Non-slip rubber grip for ultimate control and comfort PART NO. ...

SP Tools 24oz Ball Pein Hammer Fibreglass Handle

- Available in 4 sizes: 12oz, 16oz, 24oz & 32oz- Superior performance and comfort- Hardened and tempered carbon steel striking heads- Durable fibreglass handle for strength and shock reduction- Non-slip rubber grip for ultimate control and comfort PART...

SP Tools 48oz Dead Blow Hammer

- Available in 4 sizes: 16oz, 32oz, 44oz & 48oz- Rebound dampening shot filled head - No recoil- Controls striking force with minimal rebound from the striking surface- Minimises damage to the struck surface- Non sparking and non marring- Ideal for...

SP Tools 20x200mm Cold Chisel

- Available in 5 individual sizes: 12, 16, 20, 24 & 29mm- Suitable for cutting and scoring steel- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability- Single piece construction- Hexagonal shank for additional durability- Heat tempered to...

SP Tools 24oz Ball Pein Hammer One Piece

- Available in 4 sizes: 16oz, 24oz & 32oz- One-piece hardened and tempered carbon steel hammer for extreme strength and durability- Superior performance and comfort- Durable fibreglass handle for strength and shock reduction- Non-slip rubber grip for...

SP Tools Pin Punch & Chisel Set 10pce

- Pin Punches: 12, 16, 20, 24 & 29mm- Cold Chisels: 2, 3, 4, 5, 6, 8 & 10mm- Designed to drive out pins and rivets and cutting and scoring steel- Chrome Molybdenum (Cr-Mo) alloy steel for strength & durability- Single piece construction- Hexagonal shank...

SP Tools 70oz 4.3lbs Club Hammer Fibreglass Handle

- Available in 3 sizes: 45oz, 53oz & 70oz- Multi-purpose & heavy duty- Dual striking faces- Hardened high quality steel head- Superior performance and comfort- Durable fibreglass handle for strength and shock reduction- Non-slip rubber grip for ultimate...

SP Tools 32oz Ball Pein Hammer One Piece

- Available in 4 sizes: 16oz, 24oz & 32oz- One-piece hardened and tempered carbon steel hammer for extreme strength and durability- Superior performance and comfort- Durable fibreglass handle for strength and shock reduction- Non-slip rubber grip for...

SP Tools 192oz Club Hammer Fibreglass Handle

- Available in 3 sizes: 128oz, 160oz & 192oz- Multi-purpose & heavy duty- Heat treated head with overstrike protector- Durable fibreglass handle for unrivalled strength and shock reduction- Non-slip rubber grip for ultimate control and comfort PART NO. ...

SP Tools 64oz Club Hammer Steel Handle

- Multi-purpose & heavy duty- Dual striking faces- One-piece hardened and tempered carbon steel hammer for extreme strength and durability- One piece antivibration head and shaft design- Non-slip rubber grip for control and comfort PART NO. SIZE-...