Drill Bits

Alpha 1.0-13.0mm Metric Gold Series Tuffbox Pro Drill Set 25pc

Features:25 Piece Metric Gold Series- 30% More Holes – Proven through independent controlled testing, Alpha GOLD Series drills outperform other drills on the market- Sizes: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9...

Alpha 19x330mm Heavy Duty Auger Bit

Features:- FREE Fluid Film Lubricant 500ml- Premium tungsten carbide cutting edges- Replaceable HSS Cobalt sharpened centre tip- Anti friction coating- 7/16" quick release shankSpecifications- Brand: ALPHA- Series: Heavy Duty- Diameter (mm): 19- Flute...

Bordo 18mm x 12” SDS+ Carbide Rebar Cutter

FEATURES:- 18mm x 12" SDS+ Carbide Rebar Cutter- Drills through concrete embedded rebar.- Tungsten Carbide Tipped - Rotary Only - Rebar Cutters.- At last, the answer to drilling through concrete-embedded rebar! No more broken or shattered hammer bits;...

Alpha 1.6mm Jobber Drill Bit Carded Gold Series 2pk

SPECIFICATIONS:- Brand: ALPHA- Subcategory: Jobber Metric- Series: Gold- Diameter (mm): 1.6- Type of Measure: Metric- Flute Length (mm): 20- Angle (deg): 135- Material: M2 HSS- OAL (mm): 43- Pack Type: Carded

Makita SDS-MAX Scaling Chisel 50mm x 400mm

FEATURES:- Standard Range- Wide Chisels For Chipping Away Scale Of Concrete Spatter- Adapted for SDS-Max hammers

Makita SDS-MAX Bull Point Chisel 600mm

FEATURES:- Easy to use Ground Rod Adaptor for driving into ground- Reduces labour time for increased efficiency- Suits SDS-MAX HammersSPECIFICATIONS:- Type: SDS Max- Length: 600mm- Weight: 1.12kg

Bordo #34 Bright Finish HSS Jobber Drill

FEATURES:- Jobber length high speed steel #3 drill. Right hand cutting direction with an overall length of 3.75" a flute length of 2.5" and a diameter of 0.213".- Drill has a 135° point, a straight shank, black oxide finish and a hardness rating of 58 to...

Bordo Long Flatted HSS Cobalt End Mill 8mm

FEATURES:- HSS-Co8 (Cobalt) end cutting, long flatted- End Mills can cut in both axial and radial directions.- End mills are used in milling applications such as profile milling, tracer milling, face milling, and plunging.- Can be used in much harder...

Bordo Slot Drill Short Thread 8mm

FEATURES:- 8mm Short Threaded HSS Cobalt Slot Drill- HSS-Co8 (Cobalt) centre cutting, short threaded, square end- Sometimes referred to as two flute end mills.- For general milling operations - creating slots and cavities.- Commonly used when milling...

Bordo Long Flatted HSS Cobalt End Mill 12MM

FEATURES:- 12mm Long Flatted HSS Cobalt End Mill- HSS-Co8 (Cobalt) end cutting, long flatted- End Mills can cut in both axial and radial directions- End mills are used in milling applications such as profile milling, tracer milling, face milling, and...

5/16” HSS Morse Taper Shank Drill

FEATURES:- 5/16" HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

1/4” HSS Morse Taper Shank Drill

FEATURES:- 1/4" HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

7/32” HSS Morse Taper Shank Drill

FEATURES:- 7/32" HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

3/16” HSS Morse Taper Shank Drill

FEATURES:- 3/16" HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

9/32” HSS Morse Taper Shank Drill

FEATURES:- 9/32" HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

Bordo Slot Drill Short Square End HSS Cobalt 20mm

FEATURES:- 20mm Short Threaded HSS Cobalt Slot Drill- HSS-Co8 (Cobalt) centre cutting, short threaded, square end- Sometimes referred to as two flute end mills.- For general milling operations - creating slots and cavities.- Commonly used when milling...

Bordo Slot Drill Short Square End HSS Cobalt 15mm

FEATURES:- 15mm Short Threaded HSS Cobalt Slot Drill- HSS-Co8 (Cobalt) centre cutting, short threaded, square end- Sometimes referred to as two flute end mills.- For general milling operations - creating slots and cavities.- Commonly used when milling...

Bordo Slot Drill Short Square End HSS Cobalt 10mm

FEATURES:- 10mm Short Threaded HSS Cobalt Slot Drill- HSS-Co8 (Cobalt) centre cutting, short threaded, square end- Sometimes referred to as two flute end mills.- For general milling operations - creating slots and cavities.- Commonly used when milling...

Bordo Slot Drill Short Square End HSS Cobalt 5mm

FEATURES:- 5mm Short Threaded HSS Cobalt Slot Drill- HSS-Co8 (Cobalt) centre cutting, short threaded, square end- Sometimes referred to as two flute end mills.- For general milling operations - creating slots and cavities.- Commonly used when milling...

Bordo 5/8” Short Threaded HSS Cobalt End Mill

FEATURES:- 5/8" Short Threaded HSS Cobalt End Mill- HSS-Co8 (Cobalt) end cutting, short threaded- End Mills can cut in both axial and radial directions.- End mills are used in milling applications such as profile milling, tracer milling, face milling,...

Bordo 21mm MT2 Morse Taper Shank Drill Bit

FEATURES:- 21mm HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

Bordo 30.5mm HSS Morse Taper Shank Drill

FEATURES:- 30.5mm HSS Morse Taper Shank Drill- DIN345- Taper Shank Twist Drills have conical shanks suitable for direct fitting into the tapered spindle holes of drill presses and other machines, lathe tailstocks and driving sleeves or sockets- This...

Bordo 57mm Forstner Self Feed Wood Bit

FEATURES:- 57mm Self Feeding Wood Bit- Self Feeding Wood Bit- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications- 7/16" hex...

Bordo 51mm Forstner Self Feed Wood Bit

FEATURES:- 51mm Self Feeding Wood Bit- Self Feeding Wood Bit- The Bordo range of Self Feeding Wood Bits are ideal for drilling large diameter holes in soft woods for plumbing and conduit penetrations and a wide variety of other applications- 7/16" hex...

Pferd Drill Set DIN338 HSSE N 1-13mm Inox 25pce

FEATURES:- Industrial quality: horse twist drill bits with split point for industrial applications produce precise drill holes- Temperature resistant: Inox design is particularly suitable for tough and hard materials such as alloy and high-strength...

Makita Nemesis-2 SDS Max Drill Bit 14mm X 540mm

The New Nemesis II is 300% longer than Nemesis when drilling reinforced concrete! Full carbide head has full tungsten carbide drill bit head. In contrast to current Nemesis Slotted T.C.T. head,Nemesis II 12mm to 32mm dia. bits will have Full carbide...

Makita Nemesis-2 Sds Max Drill Bit 14 X 340mm - 4 Cutter

Makita 14.0 X 340mm Sds-Max Bit Nemesis E-08056

Makita Ship Auger Bit 28x470mm

Genuine Hikoki Power Tools Spare Parts

Milwaukee Masonry Hammer Drill Bit 8Pc Set

The Milwaukee Masonry Hammer Drill Bits feature a carbide-tipped design with a 3-flat shank, making them ideal for drilling into concrete, brick, block, and soft materials using hammer drill/drivers. Their distinctive red flute design enhances...

Holemaker Twist Drill With 3/4” Weldon Shank 10mm x 30mm

3/4" Weldon Shank for use in magnetic base drilling machines.Designed to utilise through spindle coolant system, to provide coolant to the cutting edgeSPECIFICATIONS:- Diameter: 10mm- Depth of Cut: 30mm- Shank Size: 3/4" (19.05mm)

Groz DSA/5-3 Reduction Drill Sleeve H&G, 5 - 3MT

Drill Sleeves are used to adapt smaller morse taper shank tools to larger machine spindles.The concentricity and taper angles are precisely controlled which allows perfect locking and concentric movement to the tool held.A Grade - (Hardened and Ground)...

Holemaker Straight Flute Step Drill Set 3 Piece 4-12mm / 5-25mm / 6-30mm

FEATURES:- The Titanium Nitride coating significantly increases the tool life by providing the following benefits:.- Increased surface hardness to 85HRC.- Ceramic surface, reducing friction by up to 30%.- Especially resistant to cold welding.- Suitable...