The B16B can be used to remove welding slag from a weld and welding spatter from along side welds. This lightweight, powerful chipping hammer can be easily positioned to break vertical and overhead surfaces. By offering a controlled chipping action, it allows operator to precisely chip away only specific areas.
SPECIFICATIONS:
- Blow per minute: 3000
- Chisel shank: Qtr Oct WF
- Chisel shank diameter (in): 1/2
- Chisel shank diameter (mm): 12.7
- Energy: 5.8 J
- Starting system: Lever
- Vibration-damped: No
- Sound Power: 97 dB(A)
- Sound Pressure: 86 dB(A)
- Uncertainty vibration-K: 4 m/s²
- Vibration: 24 m/s²
- Air consumption at load: 2.6 l/s
- Air inlet thread size (in): 1/4
- Max dynamic air working pressure: 6.3 bar
- Min hose diam (16 ft hose length): 0.38 in
- Min hose diam (5 m hose length): 10 m
- Bore diameter: 23.5 mm
- Length (L): 231 mm
- Stroke: 35.6 mm
Inner Qty: | 1 |