For general coarse to fine grinding applications in industry and professional trades. The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
FEATURES:
- High economic efficiency as tool can be changed quickly.
- Very comfortable due to ease of use and low-vibration working.
- No disruptions in use due to adhesion, slipping or coming loose.
APPLICATIONS:
- Angle grinder
- Cordless angle grinder
- Drive spindle
- Flexible shaft drive
- Straight grinder
SPECIFICATIONS:
- Abrasive: Aluminium oxide A
- Clamping system: CDR system
- Dia. external: 50 mm
- Grit size: 180
- RPM, optimum, from: 8000 RPM
- RPM, optimum, to: 13000 RPM
- Packaging unit: 100 pieces
RECOMMMENDATIONS FOR USE:
- Use COMBIDISC abrasive discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
- Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
MATERIALS THAT CAN BE WORKED:
- Annealed cast iron
- Brass
- Bronze
- Cast steel
- Copper
- Fibre-reinforced thermosetting plastics (GRP, CRP)
- Grey/nodular cast iron (GG/GJL, GGG/GJS)
- Hardened, heat-treated steels over 1.200 N/mm² (<; 38 HRC)
- Stainless steel (INOX)
- Steel materials with a hardness >; 54 HRC
- Steels up to 1,200 N/mm² (<; 38 HRC)
- Thermoplastics
- Titanium
- Titanium alloys
| Minimum Sale Qty: | 100 |
