Pferd Spiral Band Mandrel Slotted 38x25x6mm

Drum Holder - 6mm Shank - GK 3825/6
- Rubber drum holder standard type = Hardness approx. 65Ð70 Shore A
- Matching, reusable rubber drum holders for using abrasive spiral bands:
- Cylindrical
- The high degree of fitting accuracy between the components ensures that the abrasive spiral band remains securely attached to the rubber drum holder during use.
- Cylindrical rubber drum holders are designated "Holding Fixtures of Cylindrical Abrasive Sleeves" according to ISO 15637-1.

Recommendations for use:
- Abrasive spiral bands can be mounted and removed by turning them slightly to the right
- Abrasive spiral bands are easier to mount when the rubber drum holder is mounted on the tool drive
- The secure attachment of the abrasive spiral band is only guaranteed if the minimum rotational speed is observed
- Abrasive spiral bands achieve their best performance at a recommended cutting speed of 20Ð30 m/s
- Use grinding oil that is suitable for the materialin order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes:
- The maximum permitted peripheral speed is 30 m/s
- For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
- Do not allow abrasive spiral bands to protrude beyond the rubber body

SPECIFICATIONS:
- Size mm: 38 x 25
- Shank mm: 6